CompactLogix Communication Modules
Home News

Understanding the GE IC695CPU310 RX3i CPU Processor: Features, Specifications, and Benefits

Understanding the GE IC695CPU310 RX3i CPU Processor: Features, Specifications, and Benefits

December 03,2024

Overview of the GE IC695CPU310 RX3i CPU Processor

The GE IC695CPU310 RX3i CPU Processor is a central processing unit (CPU) designed for industrial automation systems. Part of the GE Fanuc RX3i series, the IC695CPU310 offers powerful processing capabilities with a 300 MHz clock speed. It integrates seamlessly into GE’s PACSystems product line, providing essential control functions for a range of automation applications.

Key Features of the IC695CPU310

The IC695CPU310 CPU Processor comes with a suite of features designed to enhance system performance and reliability. Powered by an Intel Celeron microprocessor (Pentium III), the unit boasts 10 MB of RAM and 10 MB of flash storage. This processor supports multiple communication protocols, including Modbus RTU Slave, SNP, and Serial I/O, which facilitate seamless communication with programmable logic controllers (PLCs) and other automation devices.

Two embedded serial ports—RS-232 and RS-485—offer versatile communication options, making the IC695CPU310 suitable for a variety of industrial environments. The system is equipped with eight LEDs on the chassis, providing clear visual indicators of the system’s operational status, helping users quickly identify issues like faults or normal operation.

Technical Specifications

When it comes to performance, the GE IC695CPU310 doesn’t disappoint. Here are the key technical specifications:

  • Processing Speed: 300 MHz
  • CPU Memory: 10 MB
  • Floating Point Support: Yes
  • Serial Ports: 2 (RS-232, RS-485)    
  • Serial Protocols: Modbus RTU Slave, SNP, Serial I/O
  • Power Consumption: 1.25 Amps at 3.3V DC, 1 Amp at 5V DC
  • Temperature Range: 0 to 60°C
  • Battery-backed RAM: 10 MB capacity
  • Non-volatile Flash Memory: 10 MB
  • Execution Speed: 0.195 milliseconds/1000 Boolean instructions

These specifications make the IC695CPU310 ideal for both general and specialized industrial applications, offering high-speed processing and robust memory capacity.

Connectivity and Communication Capabilities

The IC695CPU310 stands out for its versatile communication options. It features RS-232 and RS-485 ports for a wide range of industrial protocols, allowing it to interface with various automation systems. The support for Modbus RTU Slave, SNP, and Serial I/O protocols ensures compatibility with existing GE Series 90-30 and RX3i systems. This flexibility simplifies the integration of the IC695CPU310 into different automation setups, enhancing system interoperability.

Programming and Firmware Features

The IC695CPU310 module supports several programming formats, including ladder diagram, structured text, and function block diagram formats, which provide flexibility for developers and system integrators. Its system firmware can be upgraded to unlock additional features, ensuring that the CPU module remains adaptable to evolving industrial requirements. With support for up to 512 program blocks, each with a maximum size of 128 KB, the IC695CPU310 can handle complex applications with ease.

Conclusion

The GE IC695CPU310 RX3i CPU Processor is a powerful and versatile industrial automation solution. With its high-speed processing, flexible communication options, and robust memory capacity, it is well-suited for various automation applications. Whether you are integrating the module into an existing system or designing a new control solution, the IC695CPU310 delivers the reliability and performance needed to meet your industrial automation goals.

News & Blogs

  • Exploring the ABB CP651 1SAP551100R0001 Control Panel: A Comprehensive Overview 23/01

    2025
    Exploring the ABB CP651 1SAP551100R0001 Control Panel: A Comprehensive Overview
    Introduction to the ABB CP651 Control Panel The ABB CP651 1SAP551100R0001 Control Panel is a high-performance device designed to provide seamless interaction with various industrial systems. Equipped with a 10.4-inch TFT touchscreen, this control panel offers a robust solution for operators and engineers who require reliable, user-friendly interfaces for complex machinery. Key Features and Specifications of the CP651 Control Panel The ABB CP651 Control Panel comes with a range of impressive features that make it a valuable addition to industrial operations. Notably, it boasts a 10.4-inch TFT touchscreen display with a resolution of 800 x 600 pixels, capable of displaying 64,000 colors. This ensures clarity and high visibility even in challenging environments. The screen is designed for ease of use, providing intuitive control and monitoring of connected systems. Memory and Storage Capabilities In terms of memory, the CP651 is well-equipped to handle data-intensive applications. The control panel offers 256 MB of memory for both user data and user programs. The memory types include Flash Disk for data storage and DDR RAM for program storage, ensuring optimal performance and reliability during operations. Power Requirements and Efficiency The ABB CP651 is designed with energy efficiency in mind, operating at a power consumption of 24W. It requires a power supply of 24 V DC (with a range from 18 to 30 V DC), making it suitable for various industrial settings where stable and consistent power is critical. Versatile Mounting and Packaging Details This control panel is designed for front-face mounting, ensuring ease of integration into a variety of industrial setups. The compact design (with a net depth of 60 mm and net height of 232 mm) allows for installation in tight spaces without compromising functionality. The packaging of the CP651 is straightforward and includes one carton with dimensions of 370 mm (length), 120 mm (height), and 270 mm (width), ensuring safe delivery and storage of the device. Applications and Benefits of the CP651 Control Panel The ABB CP651 Control Panel is ideal for use in automation systems, control rooms, and other industrial environments where real-time monitoring and control are essential. Its intuitive touchscreen interface simplifies operator interaction with machinery, enhancing operational efficiency. Furthermore, the powerful memory and processing capabilities make it suitable for a wide range of applications, from monitoring to process control. Conclusion The ABB CP651 1SAP551100R0001 Control Panel is an advanced and reliable solution for industrial control applications. With its 10.4-inch TFT touchscreen, ample memory, and energy-efficient design, it provides excellent functionality for operators in various industrial sectors. Whether used for real-time monitoring, control, or data management, the CP651 is a versatile tool that ensures high performance and ease of use.
    All News
  • Unlocking the Power of Schneider Electric's 140NOE77111 Ethernet Network TCP/IP Module for Enhanced Automation 21/01

    2025
    Unlocking the Power of Schneider Electric's 140NOE77111 Ethernet Network TCP/IP Module for Enhanced Automation
    Introduction to the Modicon Quantum Automation Platform Schneider Electric's 140NOE77111 Ethernet Network TCP/IP Module is designed to provide a seamless communication interface within the Modicon Quantum automation platform. This module enhances your automation system by offering robust connectivity and streamlined communication for a wide range of industrial applications. Key Features of the 140NOE77111 Ethernet Network Module The 140NOE77111 module is packed with advanced features aimed at improving operational efficiency. These features include: Transparent Ready Technology: Ensuring easy integration into existing systems. Web Server Class C30: Enables the monitoring of the system remotely through a web interface. Web Services: Facilitates the exchange of data and commands over the internet. FactoryCast Configurable: Provides customization options to fit specific project requirements. These features make the module ideal for industrial and commercial applications that require reliable, high-performance networking. Communication Services and Protocols A standout feature of the 140NOE77111 Ethernet Network Module is its array of communication services, including: Modbus TCP/IP: The most widely used protocol in industrial automation. FDR Server: Efficiently handles communication between devices. Global Data and I/O Scanning: Facilitates the exchange of real-time data between devices on the network. NTP Time Synchronization: Ensures accurate timekeeping across the system. The variety of communication protocols available ensures that the module can support a wide range of network configurations. Physical Interfaces and Transmission Rate The 140NOE77111 module is designed for flexibility and high-speed data transmission. It features the following physical interfaces: MT/RJ 100BASE-FX Fiber Optic: Ideal for long-distance communication. RJ45 10BASE-T/100BASE-TX Twisted Pair: Suitable for more localized connections. With transmission rates of 10/100 Mbit/s, this module provides fast and reliable communication, ensuring that data flows smoothly across the network. Enhanced Network Management Capabilities Managing your network effectively is critical in industrial environments, and the 140NOE77111 module excels in this area with the following management features: SNMP Network Management: Provides tools for monitoring network performance and identifying issues. SMTP E-mail Notification: Sends automatic email alerts for important system events. Bandwidth Management: Ensures optimal data flow and prioritization, minimizing congestion. These capabilities ensure that the module helps maintain the integrity and reliability of the network, even in complex industrial systems. Versatile Applications and Use Cases The Schneider Electric 140NOE77111 Ethernet Network TCP/IP Module is ideal for a wide range of industrial use cases, including: Automation Systems: Integration into factory automation and process control systems. Remote Monitoring: Access system data re...
    All News
  • MOORE Company 2024 Year-End Celebration: Unite our hearts and create brilliance together 20/01

    2025
    MOORE Company 2024 Year-End Celebration: Unite our hearts and create brilliance together
    Reflecting on Achievements, Embarking on a New Journey January 17, 2025, 2024, MOORE Company hosted its grand year-end celebration at its headquarters in XIAMENS under the theme "Chasing Dreams, Creating the Future." The event not only reviewed the company's achievements over the past year but also injected fresh energy and expectations for the coming year. Employees, partners, and industry guests gathered to celebrate this significant occasion. A Glorious 2024: Milestones and Achievements During the opening of the celebration, MOORE's CEO delivered an inspiring speech, highlighting the company's remarkable accomplishments in 2024: Market Expansion: Successfully entered multiple emerging markets, further expanding its global business footprint. Technological Innovation: Achieved breakthroughs in key areas such as automation control and industrial. Customer Service: Reached a record-high customer satisfaction level, with several solutions recognized as the best of the year. Corporate Culture: Strengthened team cohesion and social influence through employee training, cultural activities, and social responsibility initiatives. The CEO remarked, "These achievements would not have been possible without the dedication and hard work of every MOORE employee. Looking ahead, we are determined to set even higher goals and drive the company to new heights." Highlights of the Celebration The MOORE 2024 year-end celebration was not just a summary meeting but also a warm and joyful gathering filled with exciting moments: Highlight Reel: A meticulously produced video showcased the company’s key milestones and successes in 2024, taking everyone through the journey of the past year. Recognition Ceremony: Awards such as “Annual Outstanding Contribution Award,” “Innovation Pioneer Award,” and “Best Team Award” were presented to motivate employees to achieve even greater success in the coming year. Performances: Creative and entertaining performances by employees highlighted their talent and team spirit. Lucky Draw: The climax of the event was the thrilling lucky draw, where numerous prizes brought the atmosphere to a peak Looking Ahead to 2025: New Goals and Opportunities In the strategic outlook session, the executive team presented a detailed plan for 2025: Accelerating Digital Transformation: Introduce advanced technology and digital tools to provide smarter and more efficient solutions for clients. Global Expansion: Strengthen market presence in Asia, North America, and Europe to build a more robust global supply chain. The leadership emphasized, “2025 will be a year full of challenges and opportunities. We are ready to take bold steps towards an even brighter future.” Moving Forward Together, Creating the Future The MOORE 2024 year-end celebration concluded successfully amidst joy and heartfelt moments. This event was not only a reflection on the past year but also an opportunity for employees and partners to collectively envision the future. As the CEO noted i...
    All News
  • Understanding the GE IS200VTURH2BAC Vibration Transducer Interface Module: A Critical Component for Turbine Control Systems 16/01

    2025
    Understanding the GE IS200VTURH2BAC Vibration Transducer Interface Module: A Critical Component for Turbine Control Systems
    Introduction to the GE IS200VTURH2BAC The GE IS200VTURH2BAC is a highly sophisticated vibration transducer interface module designed for use in GE Speedtronic Gas Turbine Control Systems. As part of the Mark VI series, this module plays a crucial role in ensuring the safe and efficient operation of gas turbines, particularly in terms of vibration monitoring and turbine overspeed protection. Its advanced features and precise functionality make it a reliable solution for turbine control in industrial applications. Key Features and Specifications of the IS200VTURH2BAC The IS200VTURH2BAC boasts an impressive set of specifications that ensure its optimal performance in demanding environments. Key details include: Part Number: IS200VTURH2BAC Manufacturer: General Electric Series: Mark VI Product Type: Vibration Transducer Interface Module Board Rating: 125 V dc Common Mode Voltage Range: ±5 V Dimensions: 11.00 x 9.00 x 3.00 inches Operating Temperature Range: 0 to 60 °C Number of Analog Voltage Inputs: 6 These features ensure that the IS200VTURH2BAC provides both flexibility and durability in a range of industrial turbine control systems. Role of the IS200VTURH2BAC in Turbine Protection The primary function of the IS200VTURH2BAC is to facilitate turbine overspeed protection, which is critical to prevent potential damage to turbines in power generation systems. This module is used to interface with vibration transducers that monitor the condition of turbines and detect any abnormal vibrations that could indicate overspeed conditions or mechanical failure. In a turbine overspeed protection system, the IS200VTURH2BAC works in conjunction with various other components, including the TTUR terminal board and the VTUR I/O board, to deliver a comprehensive safety mechanism. When the controller identifies a trip condition based on the vibration and speed signals it receives, it can automatically trigger a shutdown procedure to protect the turbine from damage. How the IS200VTURH2BAC Ensures Safe Turbine Operation The GE IS200VTURH2BAC interfaces directly with turbine controllers to provide real-time data monitoring and control. In the event of an overspeed situation, the controller uses a three-level protection system: control, primary, and emergency. These levels of protection ensure that the turbine is adequately safeguarded under all operating conditions. Control Protection: Managed by closed-loop speed control through the fuel/steam valves. Primary Overspeed Protection: Automatically managed by the controller through real-time speed feedback. Emergency Protection: Triggered by a trip signal sent from the controller to the TRPG terminal board, which effectively removes power from critical solenoids, halting turbine operation. This tiered approach provides robust protection, ensuring that turbines operate within safe parameters at all times. Installation and Maintenance Considerations Installing and maintaining the GE IS200VTURH2BAC module requires specialized...
    All News
  • Revolutionizing Procurement: How AI is Shaping the Future of Supply Chains 23/01

    2025
    Revolutionizing Procurement: How AI is Shaping the Future of Supply Chains
    Introduction: The Role of AI in Modern Procurement In today’s fast-paced global market, procurement professionals face numerous challenges, from ensuring timely delivery of parts to managing fluctuating costs and maintaining seamless operations. With the rise of AI-driven smart supply chains, these obstacles are becoming more manageable, transforming procurement strategies and streamlining processes. This article explores how AI is revolutionizing procurement, enhancing decision-making, and creating more resilient and cost-efficient supply chains. Enhancing Decision-Making with Real-Time Data In procurement, having access to real-time data is essential for making informed decisions that drive efficiency and minimize risks. Traditionally, procurement teams worked with static reports and disconnected data, often leading to delayed responses or missed opportunities. AI-powered supply chains offer a solution by integrating data from multiple sources, providing real-time visibility that enables quick adjustments based on shifting demands and supply changes. For example, companies like Siemens use AI to integrate data across their global supply networks, ensuring that every decision is based on the most up-to-date information. This proactive approach allows businesses to respond to market fluctuations swiftly, reducing risks and capitalizing on new opportunities. Optimizing Inventory Management with AI Balancing inventory is one of the most complex aspects of procurement. Overstocking ties up capital, while understocking can disrupt operations. AI-powered systems address this challenge by utilizing predictive analytics to forecast demand accurately. By analyzing historical data, market trends, and real-time sales information, AI helps businesses predict the optimal amount of inventory needed. Additionally, AI can forecast price trends and recommend the best times to purchase materials, helping procurement teams negotiate favorable deals and avoid price spikes. These insights not only optimize inventory levels but also reduce waste and enhance overall cost-efficiency, leading to more strategic procurement decisions. Streamlining Supplier Management and Collaboration A diverse supplier base can add complexity to procurement processes, but AI simplifies supplier management by continuously evaluating supplier performance and identifying potential risks. This proactive monitoring allows procurement teams to make informed decisions about alternative suppliers when necessary, ensuring a smooth and reliable flow of materials. One example is IBM’s Watson Supply Chain, which uses AI to monitor supplier performance and detect early signs of disruptions. This foresight enables procurement teams to mitigate issues before they escalate, ensuring that operations run without costly interruptions. AI also promotes collaboration by fostering transparency between procurement teams and suppliers, enhancing communication and trust. Walmart’s blockchain-based system is a pr...
    All Blogs
  • Reducing Unplanned Downtime: The Key to Optimizing Manufacturing Operations 21/01

    2025
    Reducing Unplanned Downtime: The Key to Optimizing Manufacturing Operations
    The Growing Challenge of Unplanned Downtime Unplanned downtime remains a significant obstacle for manufacturers globally. While scheduled maintenance is an essential part of machine upkeep, unforeseen breakdowns can have a far-reaching impact on operations. The aerospace, automotive, and pharmaceutical sectors, in particular, are highly reliant on machinery, and even short periods of unplanned downtime can lead to substantial production losses. The average factory loses about 25 hours of production per month due to unplanned downtime, which equates to nearly two weeks of lost productivity every year. These figures demonstrate the scale of the challenge and emphasize the need for better downtime management. The Rising Cost of Unscheduled Downtime As manufacturing systems become more complex, the cost of unscheduled downtime is increasing rapidly. In industries like automotive and oil and gas, an hour of downtime can now cost millions. For example, in automotive plants, the cost has risen to over $2 million per hour, compared to $1.3 million in previous years. The rising cost is driven by factors like inflation, stretched production capacity, and stressed supply chains. These estimates also fail to account for additional hidden costs such as maintenance labor, expedited shipping of parts, and the potential loss of business. Even with this alarming increase, many manufacturers continue to rely on reactive maintenance strategies, such as "run-to-fail" or "time-based" approaches, which do not address the severity of potential failures and are ultimately unsustainable. The Role of Predictive Maintenance in Minimizing Downtime To combat unplanned downtime effectively, manufacturers are turning to predictive maintenance. This forward-thinking approach leverages advanced technologies such as sensors, artificial intelligence (AI), and real-time analytics to monitor equipment health. By using predictive models, manufacturers can anticipate when machines are likely to fail, allowing them to schedule maintenance proactively. This not only minimizes unplanned downtime but also offers an opportunity to conduct thorough inspections, replace worn components, and perform preventive tasks like lubrication and calibration. Furthermore, predictive maintenance is closely tied to Industry 4.0 principles, integrating the Internet of Things (IoT) and AI to create smarter, interconnected factories. By embracing predictive maintenance, manufacturers can also improve overall equipment efficiency (OEE), enhance product quality, and reduce energy consumption. Smart Supply Chains: Extending Predictive Maintenance Benefits While predictive maintenance is a crucial part of minimizing downtime, its benefits can be extended further by adopting smart supply chain strategies. Supply Chain 4.0 builds on the concepts of Industry 4.0 and integrates real-time data, automation, and AI throughout the entire value chain. With enhanced visibility and connectivity between suppliers, manufact...
    All Blogs
  • How the Pandemic Accelerated Digitalization in Manufacturing 16/01

    2025
    How the Pandemic Accelerated Digitalization in Manufacturing
    The Impact of COVID-19 on the Manufacturing Industry The COVID-19 pandemic disrupted global economies and forced industries to rethink their strategies. Manufacturers, once cautious in their adoption of digital technologies, found themselves scrambling to adapt to new realities. Remote work, social distancing, and an unpredictable market made digitalization not just a competitive edge but a necessity. This shift marked a major turning point for manufacturers as they embraced automation and digital technologies to maintain operations and ensure business continuity. Cloud Services: The Backbone of Remote Operations One of the most significant changes during the pandemic was the rapid shift to remote work. With lockdowns and restrictions in place, manufacturers needed secure, reliable access to their data and systems from anywhere. Cloud services became the lifeline for businesses, enabling remote teams to stay connected and operational. By investing in cloud infrastructure, companies were able to continue their operations smoothly despite disruptions. The pandemic underscored the importance of cloud-based solutions for data security, collaboration, and business continuity, ensuring that companies could respond quickly to evolving challenges. Benefits of Cloud Managed Services Cloud-managed services provide several benefits to manufacturers, especially in times of crisis. With features like enhanced security, continuous monitoring, and automated backups, cloud services protect sensitive data and ensure seamless business operations. These services also offer increased flexibility for companies transitioning to a hybrid or fully remote workforce. As remote work becomes more entrenched, manufacturers that adopted cloud technologies early on will have an advantage in navigating future disruptions. Cloud services are not just a luxury; they are essential for long-term business sustainability. Digital Warehouse Automation: Enhancing Efficiency and Meeting Demand The shift in demand patterns during the pandemic exposed vulnerabilities in supply chains, making it crucial for manufacturers to optimize their operations. Digital warehouse automation emerged as a key strategy in adapting to these challenges. Smart warehouses, powered by automated systems and data processing, are now transforming the way goods are managed. These technologies improve operational efficiency, reduce human error, and ensure safety within warehouse environments. The Rise of Automated Guided Vehicles (AGVs) Automated Guided Vehicles (AGVs) have become essential tools in warehouse automation. Prior to the pandemic, the AGV market was already expanding rapidly. However, the need for contactless and efficient solutions during the pandemic has led to a surge in adoption. AGVs help move goods with minimal human intervention, improving productivity and reducing the risk of contamination in warehouses. Integration with technologies like 5G further enhances AGVs, enabling real-time communicat...
    All Blogs
  • The Evolution of Emotionally Intelligent and Tactile Robots 15/01

    2025
    The Evolution of Emotionally Intelligent and Tactile Robots
    The Role of Emotions in Human-Robot Interaction Robots like Sophia, the world-renowned humanoid, and AI chatbots have revolutionized how we perceive artificial intelligence. By simulating human emotions, these robots create more engaging and relatable interactions. However, while their emotional responses are impressive, they remain programmed simulations, lacking the true sensory and emotional depth of human experiences. A particularly intriguing challenge lies in replicating the human sense of touch, a nuanced ability essential for emotional and physical connection. Sophia’s conversational skills highlight the progress made in AI-driven emotional intelligence. Yet, the ability to genuinely sense and respond to touch is still an area where robots lag behind humans. This sensory gap poses a challenge for robotics researchers aiming to bring machines closer to human-like capabilities. Automation Revolutionizing the Supply Chain Automation has redefined industrial workflows, with robots taking on critical roles to enhance productivity and efficiency. In the supply chain, industrial robots excel in tasks requiring precision, speed, and repetition. These machines are invaluable for handling monotonous or hazardous jobs, freeing human workers to focus on strategic and creative roles. Despite their efficiency, robots face limitations in areas requiring dexterity and adaptability, such as managing fragile or irregularly shaped items. Human hands remain unmatched in these scenarios, particularly in warehouse environments where sensitivity and precision are crucial for handling delicate products. Collaborative Robots: Working Hand-in-Hand with Humans The emergence of collaborative robots, or cobots, marks a significant milestone in robotics. Unlike traditional industrial robots, cobots are designed to work safely alongside humans. Their smaller size and precision make them ideal for tasks in tight or dynamic spaces. However, even with these advancements, cobots often struggle with tasks requiring a gentle touch. For instance, handling eggs or fragile glassware demands a level of tactile sensitivity and adaptability that many cobots have yet to achieve. While they reduce risks and increase operational flexibility, further innovation is needed to bridge this gap. Breakthroughs in Robotic Touch Technology Recent innovations are bringing robots closer to emulating the human sense of touch. Notable breakthroughs include the development of Hank, a robot engineered by Cambridge Consultants. Hank uses advanced sensors and soft grippers controlled by airflow to mimic human-like tactile sensitivity. Each finger on Hank operates independently, enabling it to handle small, irregular, or delicate objects without requiring constant reprogramming. Similarly, Wootzano’s electronic skin is transforming robotic capabilities. This cutting-edge technology integrates piezoelectric and piezoresistive sensors, along with embedded temperature sensors, allowing robots to detect a...
    All Blogs
leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

Our hours

Mon 11/21 - Wed 11/23: 9 AM - 8 PM
Thu 11/24: closed - Happy Thanksgiving!
Fri 11/25: 8 AM - 10 PM
Sat 11/26 - Sun 11/27: 10 AM - 9 PM
(all hours are Eastern Time)

Home

Products

whatsApp

Contact Us